Resetting Settings To The Factory Defaults; Downloading Player Update Software; Connecting To The Internet; Determining If The Network Connection Is Active - Insignia NS-32LB451A11 User Manual

Resetting settings to the factory defaults

To reset settings to the factory defaults:
1 Press ENTER. The Settings menu opens.
2 Press or to highlight System. The System
menu opens.
Language
Parental
System
Settings
Network
Display
Audio
3 Press or ENTER to access the system options.
4 Press or to highlight Restore factory
defaults, then press ENTER. The following
menu opens.
Restore factory settings and deactivate all connected applications
Restore factory settings
Deactivate all connected applications
Deactivate Netflix
Deactivate Pandora
5 Press or to highlight an option, then press
ENTER. A message appears asking you to
confirm your selection.
6 Press or to highlight OK, then press ENTER.
7 Press to go to the previous menu.

Downloading player update software

To download player update software:
1 Press ENTER. The Settings menu opens.
2 Press or to highlight System. The System
menu opens.
Language
Parental
System
Settings
Network
Display
Audio
3 Press or ENTER to access the system options.
4 Press or to highlight Update Via Network,
then press ENTER.
54
System
Optical Disc AutoPlay On
BD-Live Internet Access Always Allow Acess
USB (7.1GB Free)
BD-Live Storage (USB)
Erase Blu-ray Storage
Screen Saver Duration 5 Minutes
Update Via Network Required Storage: 48MB
Restore factory defaults
System
Optical Disc AutoPlay On
BD-Live Internet Access Always Allow Acess
BD-Live Storage (USB) USB (7.1GB Free)
Erase Blu-ray Storage
Screen Saver Duration 5 Minutes
Update Via Network Required Storage: 48MB
Restore factory defaults
www.insigniaproducts.com
NS-32LB451A11 Insignia 32" LCD TV/Blu-ray Combo, 1080p
5 Follow the on-screen instructions for updating
the software.
6 Press to go to the previous menu.

Connecting to the Internet

Determining if the network connection is
active
To determine if the network connection is active:
1 Press ENTER. The Settings menu opens.
2 Press or to highlight Network, then press
ENTER. The Network menu opens.
Settings
Language
3 Press or to highlight Wired, then press
ENTER. The IP Settings screen opens. If the
network connection is active, Link Up appears
next to Link Status. If the network connection is
not active, Link Down appears next to Link
Status.
Link Status
MAC Address
IP Mode
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
4 Press to go to the previous menu.
Parental
System
Wired
Network
Wireless
Network Test
Display
Audio
IP Settings
Link Down
00:22:84:08:1c:b3
Dynamic
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Apply Cancel