Connecting Power; Connecting A Cable Or Satellite Box - Insignia NS-32LD120A13 User Manual

Connecting power

To connect the power:
• Plug the AC power cord on the back of your
TV/DVD combo into a power outlet.
Cautions
• Your TV/DVD combo should only be operated
from the power source indicated on the label.
• Always unplug the AC power cord from the
power outlet when you will not be using your
TV/DVD combo for an extended period of time.
8
NS-32LD120A13 Insignia 32" LCD TV/DVD Combo

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than
one connection type. To get the best video, you
should use the best connection type available. For
more information, see
use?" on page 7.
Using HDMI (best)
To connect a cable or satellite box using HDMI:
1 Make sure that your TV/DVD combo's power
cord is unplugged, and all connected
equipment is turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI cable (not provided) to one of
the HDMI jacks on the back of your TV/DVD
combo and to the HDMI OUT jack on the cable
or satellite box.
4 Plug your TV/DVD combo's power cord into a
power outlet, turn on your TV/DVD combo, then
turn on the cable or satellite box.
5 Go through the Setup Wizard on page 18.
Note
www.insigniaproducts.com
"What connection should I
Cable or satellite box
HDMI cable
USB HDMI 1 HDMI 2 / DVI VGA
Back of TV/DVD combo
An HDMI cable carries both audio and video. You do
not need to use any audio cables.
CO
PC / DVI DIGITAL
AUDIO IN OUTPUT Y