Connecting A Cable Or Satellite Tv Box; Connecting An Hdmi Device - Insignia NS-32LB451A11 User Manual

Connecting a cable or satellite TV box

Connection type Video quality
HDMI Best
Component Better than composite, S-Video, or coaxial
S-Video Better than composite or coaxial
Composite Better than coaxial
Coaxial Good
Note
Installation methods may vary depending on the
type of cable or satellite box. Contact your cable or
satellite provider for more information.
To connect a cable or satellite TV box:
1 Make sure that your TV/Blu-ray combo's power
cord is unplugged and the cable or satellite TV
box is turned off.
2 Connect the incoming cable from the cable TV
or satellite TV wall jack to the cable-in jack on
the cable or satellite TV box.
Back of TV/Blu-ray combo
Component S-Video Video
3 Depending on the jacks available on the cable
or satellite TV box, connect a cable from the
outgoing jacks on the cable or satellite TV box
to the corresponding jacks on the back of your
TV. The connection can be to an HDMI jack,
COMPONENT1 or COMPONENT2 INPUT jacks,
AV INPUT S-VIDEO jack, or AV INPUT VIDEO
jack.
16
NS-32LB451A11 Insignia 32" LCD TV/Blu-ray Combo, 1080p
4 If you use the COMPONENT1 or COMPONENT2
INPUT jacks, connect an audio cable to the L/R
audio jacks to the right of the video jacks.
Or,
If you use the AV INPUT S-VIDEO or AV INPUT
VIDEO jack, connect an audio cable to the AV
INPUT AUDIO L/R audio jacks.
Note

Connecting an HDMI device

To connect an HDMI device:
1 Make sure that your TV/Blu-ray combo's power
cord is unplugged and the HDMI device is
turned off.
2 Connect an HDMI cable to the HDMI1 INPUT or
HDMI2 INPUT jack on the back of your
TV/Blu-ray combo and to the HDMI OUT jack on
the HDMI device.
Note
HDMI
HDMI device
3 Turn on your TV/Blu-ray combo, then turn on
the HDMI device.
4 Press INPUT to open the source list, press
INPUT repeatedly or press
HDMI-1, HDMI-2, or HDMI-3, then
press ENTER.
Note
www.insigniaproducts.com
If the cable or satellite TV box does not have an
HDMI, component, S-Video, or composite jack,
connect the cable or satellite TV box to the
ANT/CABLE IN jack on the back of your TV/Blu-ray
combo. For more information, see "Connecting an
antenna or cable TV (no box)" on page 15.
You can also connect an HDMI device to the
HDMI3 INPUT jack.
Back of TV/Blu-ray combo
or
To connect a DVI device, use a DVI to HDMI adapter
cable to connect to any HDMI jack on your
TV/Blu-ray combo, then connect an audio cable to
the PC INPUT AUDIO jack on the back of the
TV/Blu-ray combo.
HDMI2
HDMI1
INPUT
INPUT
to highlight