Skoda Amundsen+ Operating Instructions Manual page 8

Screen operation
The screen of the unit is known as a "touchscreen ". Areas of the screen with a
coloured border are presently "active" and can be operated by touching the
screen or by pressing the corresponding button
Some of the functions of the radio navigation button can be operated using the
multifunction steering wheel, refer to the Owner's Manual for your vehicle.
"Slider"
A
›
Press the slider and move it up or down (or turn the menu knob
A
within the current menu.
Go to next menu level
B
›
Pressing the button takes you to the next menu level.
B
Return to the previous menu level using the control button
Set value
C
›
Pressing the button opens an additional screen in which it is possible to set
C
the required value by turning the menu knob
"Pop-up window"
D
›
Pressing the function key opens a so-called "Pop-up window" with addition-
D
al menu points.
›
Briefly press one of the available menu points. The pop-up window will disap-
pear and the newly selected menu point is displayed in the function key.
If none of the available menu points is chosen, the "pop-up window" will disap-
pear after around 5 seconds.
A DAB ensemble appears in the list of DAB stations after pressing this function
key » page 10, Digital radio reception DAB.
6
General information
Fig. 2
Overview of the operating ele-
ments on the screen
» page 5, Unit overview.
17
) to move
15
.
13
, e.g. treble.
15
"Checkbox"
E
Some functions can only be switched on or off. There is a so-called "Check box" in
front of a function which can only be switched on or off:
 - Function is switched on.
 - Function is switched off.
›
To switch a function on or off, briefly press the corresponding function once.
Variable function keys
F
The key function is context-dependent. The function currently being offered can
be selected by pressing the appropriate function key
Input screen with keypad
The input screen with keypad appears when entering a new line, searching for a
point of interest or a telephone number, for instance.
If you press a function key with a character on the keypad, this character appears
in the input line in the upper part of the screen.
You can also delete or change the string in the entry line and add special charac-
ters.
The available characters are context-dependent.
Input possibilities:
- toggles between upper and lower case, or between numbers and special

characters (context-dependent)
- shows the special characters for the selected language
áü
- switches to the Cyrillic script

- switches to the Latin script
ABC
(or using button ).
F
17
Fig. 3
An example of an input screen
with keypad

