Operation - Joyner JNSZ150DS Owner's Manual

a. Pull seat adjustment handle upward to disengage seat slide.
b. Move seat to desired position.
c. Be sure seat adjustment handle snaps back into place and that seat is locked into
position. (See Fig. 3 )
Before attempting to adjust the seat ensure that engine of the Go-Kart is stopped.
Never operate this Go-Kart when the provided seat is not securely fastened, to do so could
result in a strong possibility of severe personal injury or loss of life. Before attempting to
adjust the seat ensure that engine of Go-Kart is stopped.
h. Reverse Adjustment
Press down the shift lever to the "F" position so that the unit can move forward ,pull
back the lever to "R" so that the unit can move backward.(See Fig.4)
i. Starting And Operating Instructions
a. Before starting the engine, be sure that the driver is seated properly in the Go-Kart
and tighten the seatbelt.
b. Testing the Go-Kart in a open place at the beginning to learn how to start, turn
and stop.
c. Operate the Go-Kart slowly until you are familiar with it.
e. The turning radius of this Go-Kart is small and agile, so the centrifugal force is
very high when turning at high speed. Slow down to a more controllable speed when
turning to prevent the Go-Kart from rolling over.
f. To prevent vehicle from rolling over, be sure to only turn the vehicle at a slow
more controllable speed. Heel on the ramp of the main board when turning. Keep your
leg rely on the foot pedal, you can feel the kart is stable because of the gravity is
adjusted and won't roll over.
Figure 4
18

OPERATION