What's In The Box; Figure 31 What's In The Box - OceanSat AIS Manual

Installation

4.1 What's in the box?

Figure 31 shows the items included with your AIS transceiver purchase. The following section gives a brief
overview of each item. Please ensure all items are present and if any of the items are missing please contact
your dealer.
Transceiver
Data cable

Figure 31 What's in the box

● Oceansat Class A AIS transceiver/Inland AIS
The main transceiver and display.
● Data cable
A 1m (3.3ft) long, 50 way data cable to connect the transceiver serial data ports to the junction box.
● Junction box
Provides screw terminals for the data connections to ships sensors and display systems.
● Power cable
A 2m (6.6ft) long power cable to supply the transceiver. The power cable also include alarm output
connections.
● Trunnion bracket
Bracket for mounting the transceiver above a flat surface (e.g., on top of an instrument panel).
● Panel mount brackets
Clamp brackets used when mounting the transceiver through a panel (flush mount).
● Fixing screws
Eight fixing screws are provided for mounting the transceiver (when using the trunnion bracket) and
the junction box.
● User and installation manual
This document - please read thoroughly before attempting to install and commission the transceiver.
● Quick start guide
The quick start guide gives a handy one page reference for the installation process.
● Support tools CD
Contains software tools for configuration of the AIS transceiver and software upgrade.
● Mounting template
Template for cutting an aperture when panel mounting the transceiver.
Page 32
Panel mount brackets
Trunnion bracket
GPS antenna
Mounting template
Power cable Screws
Junction box
Product manual
Quick
installation
guide
CD
Quick
operation
guide