Main Operating Screens; Figure 4 Selection Of Main Operating Screen - OceanSat AIS Manual

Icon

1W
IL
Table 1 Status Icons

3.4 Main operating screens

In normal operation the display shows one of six main operating screens. The next screen can be selected at
any time by pressing the 'Screen' function key as shown in Figure 4. The following subsections describe each
of the operating screens in more detail.
Figure 4 Selection of main operating screen
Description
Shown flashing when an alarm is active, shown constantly
when an alarm is active, but acknowledged.
Shown when the transmitter is set to 1W mode.
Shown when the AIS transceiver is operating in 'Inland
Waterways' mode.
Target list
Target plot
Own vessel &
voyage data
Alarms
Operation
Own dynamic
data
Received
messages
Page 13