Table of Contents
Advertisement
Operation
Figure 23 Main menu screen
3.16.1 Voyage data menu
The voyage data menu provides quick access to the most commonly changed AIS transceiver parameters.
Figure 24 The voyage data menu
From this menu you can set the following parameters:
● Navigational status - select the most appropriate navigational status for your vessel from the list.
○ Under way using engine
○ At anchor
○ Not under command
○ Restricted manoeuvrability
○ Constrained by her draught
○ Moored
○ Aground
○ Engaged in fishing
○ Under way sailing
○ Not defined (default)
● Destination - enter the destination for the current voyage, 20 characters maximum.
● ETA - enter the estimated time and date of arrival at the destination. The date format is DD/MM and
the time format HH:MM using a 24 hour clock and UTC time.
● Draught - enter the maximum present static draught for your vessel in metres. The format for this
value is xx.x m (e.g., 02.5m). The maximum draught is 25.5m, you should enter this value if your
draught exceeds 25.5m.
● Cargo/ship type - see section 4.5.3.
● Number on board - number of crew on board, up to 8191 maximum.
Page 26
13:20:47
OK
MAIN MENU:
VOYAGE DATA
MESSAGES
USER SET TINGS
INSTALLATION
MAINTENANCE
Back
13:20:47
OK
VOYAGE DATA:
Nav Status:
>>(15) not defined (default)
Destination:
>>Not Available
ETA:
--:--:--
Draught:
Not Available
Back
INT
GPS
Selec t
INT
GPS
Hide quick links:
Advertisement
Table of Contents
