Removing A Hard Drive In Bay #1 - Digimerge VBAY3HD Instruction Manual

Setting Up The Expansion Bay

Removing A Hard Drive In Bay #1

1. Unscrew the four silver screws on the bottom of the unit.
2. Gently lift the hard drive out of the bay, and disconnect the SATA power and SATA data cable
from the hard drive.
Figure 3.3 Lift the hard drive out of the bay, and carefully disconnect the SATA power and SATA data cable.
3. Remove the screws securing the mounting brackets.
Figure 3.4 Hard drive bracket removed.
11