Page 2
Thank you for purchasing this product. Digimerge is committed to providing our customers with a high quality, reliable security solution. This manual refers to the following models: • VBAY3HD • VB300 Digimerge Blade™ (Not Included) For more information on this product, firmware updates, and accessory products, please visit us at: www.digimerge.com...
Important Safeguards In addition to the careful attention devoted to quality standards in the manufacturing process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment.
Service 13. Servicing - Do not attempt to service this video 19. Cleaning - Unplug the video product from the wall equipment yourself as opening or removing covers outlet before cleaning. Do not use liquid cleaners or may expose you to dangerous voltage or other aerosol cleaners.
Page 5
In order to improve the feature functions and quality of this product, the specifications are subject to change without notice from time to time. www.digimerge.com...
Page 6
Features • 3 hard drive expansion capability (total of 3 hard drives; not included) • Mirroring capability - duplicates data on your Blade, providing secure data redundancy • Ultra-slim, stackable design • Rugged metal enclosure • Dual exhaust fans for optimal cooling...
Getting Started GETTING STARTED The system comes with the following components: USB CABLE EXPANSION BAY POWER ADAPTER GROUNDING CABLE HDD SCREWS X12 INSTRUCTION MANUAL HARD DRIVE SIZE, HARD DRIVE CONFIGURATION MAY VARY BY MODEL. PLEASE REFER TO YOUR PACKAGE FOR SPECIFIC CONTENT DETAILS. CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.
Basic Setup BASIC SETUP 1. UPGRADE THE FIRMWARE a. Upgrade the Blade with the included firmware. See “Upgrading The Firmware” on page 4. The Blade requires a firmware upgrade in order to detect the expansion bay. 2. CONNECT THE GROUNDING CABLE a.
Front and Rear Panel FRONT AND REAR PANEL Front Panel Rear Panel Figure 1.3 Front and rear panel. 1. POWER LED: Glows red when unit powers on. 2. HDD LED Indicators: Flickers green during hard drive activity. 3. Exhaust Fan: Draws hot air out of the expansion bay. Keep the exhaust vents clear. 4.
Upgrading The Firmware 5. Select and press on the remote ENTER to start the firmware upgrade. Once the firmware upgrade is complete, UPGRADING THE the system prompts you with the message: PLEASE RECYCLE DVR POWER. FIRMWARE You must install the latest firmware on the Blade before you can use the expansion bay (version or higher).
Setting Up The Expansion Bay SETTING UP THE EXPANSION BAY After you upgrade the Blade to the latest firmware, the expansion bay is ready to configure. The expansion bay offers three modes: 1. As a standalone external hard drive that extends the Blade’s storage capacity. 2.
Setting Up The Expansion Bay Select Recording Mode 1. Select RECORD from the main menu. Press ENTER on the remote. The Record menu opens. 2. Select BACK UP MODE. Change the value to OFF. Press f(-) or f(+) on the remote to change the values.
Setting Up The Expansion Bay Setting Up The Expansion Bay In Mirror Mode You can set the expansion bay to run in Mirror Mode for data redundancy. Running your expansion bay in Mirror Mode means that you will always have a backup of the Blade’s hard drive data. How the Mirroring Sequence Works Expansion Bay Blade DVR...
Setting Up The Expansion Bay Select Recording Mode 1. Select RECORD from the main menu. Press ENTER on the remote. The Record menu opens. 2. Select BACK UP MODE. Change the value to MIRROR. Press f(-) or f(+) on the remote to change the values.
Setting Up The Expansion Bay Adding A Hard Drive In Bay #1 Note that the hard drive in Bay #1 is installed upside down, with the underside of the hard drive exposed. Bay # 2 Bay # 3 A hard drive may be installed in any bay.
Page 18
Setting Up The Expansion Bay 2. With the hard drive upside down, screw the metal bracket on both sides of the hard drive with the included hard drive screws. The screws that mount NOTE: the hard drive to the bracket Hard Drive screw Bracket screw are larger.
Setting Up The Expansion Bay Removing A Hard Drive In Bay #1 1. Unscrew the four silver screws on the bottom of the unit. 2. Gently lift the hard drive out of the bay, and disconnect the SATA power and SATA data cable from the hard drive.
Setting Up The Expansion Bay Adding A Hard Drive To Bay #2 & 3 1. Plug in the SATA power connector and SATA data connector into the hard drive (Figure 3.5). Do not force in the connectors. The connectors are designed to go in one way only.
Appendix A: VBAY3HD Specifications APPENDIX A: VBAY3HD SPECIFICATIONS Display LED Display Red (Power), Green (HDD 1 - 3) Hard Drive Maximum Capacity Three 3.5‘‘ SATA HDD Minimum Rotational Speed 7200 RPM Seek Time Faster than 10ms (average) Connections USB 2.0...
Page 22
Appendix A: VBAY3HD Specifications Appendix A (cont’d) Accessories Ground Conductor (Grounding Cable) AC Adaptor (12/5A) with AC Cord Screws (5W/32-32) for HDD Installation USB 2.0 Cable...