Table of Contents
Advertisement
Upgrading The Firmware
UPGRADING THE
FIRMWARE
You must install the latest firmware on the
Blade before you can use the expansion bay
(version
or higher). The firmware
2.88D38F_B
can be found *online. Copy the firmware onto
your USB memory stick before upgrading.
To upgrade the firmware on the Blade:
1. Insert USB memory key with the
downloaded firmware into the Blade.
2. Press
(Menu) on the remote. The
System Menu opens.
Figure 1.4 Select the System icon to enter the system
setup screen.
3. Select System and press ENTER on the
remote.The Setup menu opens.
4. Select
FIRMWARE UPGRADE
button on the remote. The system
ENTER
prompts you with the message:
FIRMWARE UPGRADE FROM USB?
Figure 1.5 Firmware upgrade screen.
4
5. Select
Figure 1.6 Power off the Blade for several seconds and power
back on after the prompt appears.
6. Turn off the Blade for five seconds, then
7. Wait until the system returns to the setup
. Press the
and press
YES
ENTER
to start the firmware upgrade.
Once the firmware upgrade is complete,
the system prompts you with the message:
PLEASE RECYCLE DVR POWER.
turn it back on.
The system flashes a blue prompt screen.
This is normal.
menu to complete the firmware upgrade
process.
*Downloading Firmware Updates
1.
Go to www.lorexcctv.com; search and
download the latest firmware upgrade for
the Blade.
2.
Extract the zipped file onto a USB memory
key. The firmware ends in a .dvi extension
NOTE: The firmware file should be the only file
on the USB memory key.
NOTE: It is highly recommended to upgrade
Digi-Client to the latest version for improved
compatibility.
on the remote
Advertisement
Table of Contents
