Units - Manitowoc Indigo Series Installation, Use & Care Manual

Operation

UNITS

1. From the Set-Up menu, use the Down arrow to
highlight Units.
2. Press the Checkmark. On this screen, you can
choose whether the ice machine will display
measurements in Celsius or Fahrenheit, kilograms
or pounds, and gallons or liters by highlighting your
choice of each pair and pressing the Checkmark.
Selecting one of each pair will deselect the other.
Make sure to navigate with the Down arrow to make
all three choices.
3. When the three checks reflect your preferences, use
the Down arrow to navigate to Exit and press the
Checkmark. The display will return to the Set-Up
menu.
ICE CLARITY
In areas with poor potable water quality, the ice machine
makes cloudy ice. Setting Ice Clarity to ON will add
additional water during the freeze cycle to dilute the
water that contains a high content of dissolved solids in
the water trough. This feature decreases production and
increases water usage. A water filter is recommended to
produce the highest quality ice while maintaining the
least expensive mode of operation.
1. From the Set-Up menu, use the Down arrow to
highlight Ice Clarity.
2. Press the Checkmark. On this screen, you can
choose to turn the ice clarity feature ON or OFF by
highlighting your choice and pressing the
Checkmark. Selecting one will deselect the other.
3. When the check reflects your preference, use the
Down arrow to navigate to Exit and press the
Checkmark. The display will return to the Set-Up
menu.
LCD BRIGHTNESS
Here, the brightness of the LCD display can be adjusted.
1. From the Set-Up menu, use the Down arrow to
highlight LCD Bright.
2. Press the Checkmark. You will see one to four
checkmark symbols indicating the brightness levels
of the display. Level 1 is one checkmark, level 2 is
two checkmarks, etc.
3. Use the Up and Down arrows to select your
preference.
4. When the number of checkmark symbols reflects
your preference, press the Checkmark button. The
display will return to the Set-Up menu.
30
PASSWORD ON
A password can be added to prevent unauthorized
changes to ice machine settings.
1. From the Set-Up menu, use the Down arrow to
highlight Password On.
2. Enter the password and press the Checkmark.
3. Press the Left arrow to return to previous screens
and to the Set-Up menu.
EDIT PASSWORD
The password can be changed on this screen
1. From the Set-Up menu, use the Down arrow to
highlight Edit Password.
2. Press the Checkmark and confirm current password.
3. Enter new password and press the Checkmark.
4. Press the Left arrow to return to previous screens
and to the Set-Up menu.
CLEAN MINDER
Clean Minder is a feature that displays a cleaning
reminder at a set time interval.
1. From the Set-Up menu, use the Down arrow to
highlight Clean Minder.
2. Press the Checkmark. On this screen, you can
choose to turn the reminder ON or OFF by
highlighting your choice and pressing the
Checkmark. Selecting one will deselect the other.
3. You can also choose the time interval from this
screen by highlighting Set Interval and pressing the
Checkmark.
4. Press the Left arrow to return to previous screens
and to the Set-Up menu.
AUCS RUNTIME
Automatic Cleaning System is an optional accessory
and will perform a cleaning cycle at a set time interval.
1. From the Set-Up menu, use the Down arrow to
highlight AuCS RunTime.
2. Press the Checkmark. On this screen, you can
choose to turn the feature ON or OFF by highlighting
your choice and pressing the Checkmark. Selecting
one will deselect the other.
3. You can also choose the time interval from this
screen by highlighting Set Interval and pressing the
Checkmark.
4. Press the Left arrow to return to previous screens
and to the Set-Up menu.
Section 3
Part Number 000007345 2/14