Table of Contents
Advertisement
3.3 LED Indicator
a.
RAID Mode Status Display
LED Indicator
Blue, Solid
Blue/Green,
Blinking
Green, Solid
b.
Hard Disk Status Display (Tri-Color LED1 1 1 1 and 6 6 6 6 )
LED
Indicator
Green, Solid
Orange/Green,
Blinking
Orange/Green,
Blinking
Red, Solid
Red/Green,
Blinking
Red, Solid
Red, Blinking
**Attention: If only USB power is available in Mirror or Normal Mode, if two
HDDs are installed then HDD2 will not be active. LED6 will remain red.
ACP-2212P Chapter 3 Setup and Operation
Status Description
Normal Mode ( LED 4)
Hard disk failure or no hard disk installed
Mirror Mode (LED3)
Status Description
Hard disk normal
Rebuilding data (destination hard disk for data)
Comparing data (destination hard disk for data)
Hard disk failure or no hard disk installed
Hard disk has bad sectors (2 flashes every 8 sec-
onds)
Hard disk not properly connected (accompanied by
5 long beeps)
RAID damaged (accompanied by short beeps)
15
Advertisement
Table of Contents
