Raid Mode Instructions - Acard ACP-2212P User Manual

3.2 RAID Mode Instructions

1. About the ACP-2212P Mirror mode
Mirror mode is supported by the ACP-2212P. When two HDDs are
installed in the 2212P and the power supply connected, this enables Mirror
mode with HDD1 as the master. If the USB data cable is connected
without an external power supply, the ACP-2212P will only activate HDD1.
When external power is connected HDD1 will be automatically mirrored to
HDD2.
2. ACP-221P Normal or Mirror Mode Configuration
The ACP-2212P supports either Normal or Mirror mode but this can only
be configured by installing the Utility software. The instructions are as
follows:
A. Start the installed Mirror Mini Utility. If you have just installed the
software, go to "Start/Program Files" and double click on the Mirror Mini
Utility. The program icon
process will add the Utility to the system's startup options so it will be
automatically launched when the computer is restarted in the future.)
Double click on the "
shown below:
ACP-2212P Chapter 3 Setup and Operation
will appear in the system tray. (The installation
" icon in the system tray to open the Utility tool as
13