Beko P7 Service Manual page 9

Connection of Mains Cable
Always utilise the enclosed mains cable in order to
guarantee optimal image quality.
First of all, insert the main cable into the input panel,
and only thereafter into the socket.
• Never utilise a damaged mains cable!
• Use only sockets with a protective eathing conductor
system to ensure safe operation.
A line filter and switches for sabilisation of the supply
voltages ensure safe operaion within normal mains
voltage variations. In case the mains voltage lies
beyond the stated limits, please contact your responsible
sales office. In the event the mains cable cannot be
utilised on account of differing standards in your
country, please see to it that you utilise a mains cable
commensurate with the country-specific standards
which are listed in the following:
• USA UL
• Germany VDE
• Canada CSA
• Switzerland SEV
• Great Britain BASE/BS
• Japan MITI
This list is not complete. For reasons of safety it may
be necessary to select a different safety standard.
At any rate, the mains cable has to consist of three
wire conductors of at least 10A/0.75 mm2 in order
to avoid an accident as a result of electric shock. One
of the three wires is impemented on both ends of the
cable as an earthing contact connection.