Table of Contents
Advertisement
Features Menu (Yellow Button)
Press the ( ) button on your remote
control. Select the Function menu line
with the ( ) button.
You can reach this menu directly by
pressing the Yellow (
can select the headings you want to
adjust in this menu by using the
Up/down (
Child Lock: If you switch this feature On, the
buttons on the TV will not work when the TV is
in Stand-by mode or on and screen will show
a Child Lock warning.
Language: Select the menu language line and
press (
) or the right ( ) button. The
screen will show the menu languages.
Select the desired language using the
Up-down (
buttons. Press the ( ) button again. Your
television will now feature the language
you have choosen for all the adjustment
indicators.
Menu Background: Using this feature you
can adjust the background of the viewable menus
and other OSDs as Transparent or Opaque.
) button. You
)/(
) buttons.
)/(
) and Right-left ( )/( )
Stand-by Control: Your television features an
automatic stand-by feature which can be enabled
between 15 and 120 minutes. If you
want your television to autmatically go
into stand-by, please select the Stand-
by Control line. Select the desired
duration with the Right ( ) and left ( )
button.
At the end of the choosen duration the
screen will show a 30 second countdown
before switching off the screen and
entering into stand-by. To cancel the
automatic stand-by select "0" at the Stand-by
Control.
VCR mode: Using this feature you can avoid
image distortions from the device or the magnetic
tape while watching. For this you have to swtich
the VCR mode to ON.
Please note: This feature is only active for the
AV inputs. This feature will not be seen in Function
menu while watching programs or in PC mode.
This feature becomes automatically active in the
"0" numbered program.When you store the "0"
numbered channel as video device antena output,
you will be able to avoid image distortions from
the device or the magnetic tape while watching.
ZOOM: To activate this feature you have to
press the ( ) button on your remote
control while watching a program.
When you enter this menu you will see
in the lower right corner of the screen
the Zoom sub-menu. Using the Up/down
(
)/(
) buttons you can enlarge or
shrink the image in 16 steps. During the
Zoom process the image will be enlarge
focused on the center.
want to move the image up/down or
right/left ( )/( ) press the (
on your remote.
buttons to move around.
In the event that you wish to exit the
Zoom menu, simply press the ( ) button.
Please Note: The Zoom function is not
available during PIP.
) button
Advertisement
Table of Contents
