Table of Contents
Advertisement
Control Menu
Press the ( ) button. You will see the
MENU with all the headings of the
different controls on screen. The Right/left
buttons ( )/( ) enable you to move
between the different control menu title where
you can indicate your choice by pressing the
(
) or Up/down (
In the event that you wish to exit the application
at any given stage, simply press the MENU or
TV button.
Tuning the television
You can either tune the programs automatically
or manually storing them in your television.
Please Note
In the case that your television does not receive
any broadcast signals for 5 minutes it will
automatically go on stand-by. The 5 minute
countdown OSD will be on screen.
Automatic tuning and storing of
the television program channels
with ATS
The ATS (Automatic Tuning System) on your
television enables the automatic finding and
sequencing of channels.
Sequencing is done according to the selected
country channels, which broadcast Teletext and
channel names; followed by all channels with
Teletexts without channel names and then by
channels without Teletext, to be concluded by
foreign channels broadcasting Teletext with
channel names.
)/(
) button.
Press the (
button ( ) to select the Adjustment menu.
You can reach this menu directly by
pressing the Blue ( ) button. Using the
Up/down (
ATS line and press the (
screen will show the ATS menu. At the
Country line select the country you want
to watch by using the Right-left ( )/( )
buttons.
Afterwards press the down (
to select the autoprogram heading and
press the (
buttons. The screen will show a warning
before the Automatic Tuning.
To start Autoprogram press the ( )
button; the channels will be searched
automatically and those with broadcasting will
be saved from the first program into memory.At
this point, the autoprogram warning menu
appears showing an indicator that displays the
present situation of the Automatic Tuning process.
To stop the process at any given time, press the
(
) button.
After the automatic search the screen will show
the Program Table. The program numbers that
have been stored are reflected in the Program
Table, giving you the ability to assign any
program number to the channel of your choice.
To quit the station list, press the ( ) button.
) button Press the right move
)/(
) buttons select the
) button, the
) or the Right/left ( )/( )
) button
Advertisement
Table of Contents
