Other I/O - Electron ANALOG 4 Reference Manual

9.3 CV Track
The CV Track parameters will change depending on what the CV Configuration for each
channel is set to. Typically the parameters that are common are TUN / FIN for Course and Fine
Tuning, VAL, Voltage Level of CV (Value Lin), SRC, Notes for Sending to CV Output.
Selecting CV Track
Assigning Tracks to CV Output
Identifying Output Connection
required

10. Other I/O

Installing KITS using SYSEX
Installing PATTERN, SOUND,
GLOBAL Slot, SONG using
SYSEX
1. Select [CV] i.e. CV Track
2. Select [CV x] where x is the channel, A,B,C or D for the selected CV
channel. Parameters shown will change depending upon CV Config.
1. Select [CV] i.e. CV Track
2. Select [CV x] where x is the channel, A,B,C or D.
3. Adjust (E) Controller for assigning Track 1-4, FX or CV to CV Output
1. Select [CV] i.e. CV Track
2. Select [CV x] where x is the channel, A,B,C or D.
3. Plug indicator at the bottom of display shows the Tip or Ring flashing
showing how the connection will send CV/Gate signals
Requires connection to external Sysex source i.e. PC or MAC via MIDI /
USB MIDI and a SYSEX File Utility e.g. Elektron's C6 SysEx Tool
1. Select [FUNCTION] + [KEYBD C2] i.e. Global Mode
2. Select SYSEX DUMP option using (LEVEL) or [˄] or [˅] and [YES/SAVE]
to select
3. Select SYSEX RECEIVE
4. Select KIT and location to store downloaded KIT, using (LEVEL) or [˄] or
[˅] and [YES/SAVE] to select
5. System Waits to receive data
Use a SysEx tool to send KIT file
Follow same process as for KIT above
31