Electron ANALOG 4 Reference Manual page 14

Immediately Change Patterns
at same step during playback
(Direct Jump Pattern Mode)
Change Pattern at the end of
current pattern to start of new
(Sequential Pattern Mode)
Saving a Pattern
Reload an active Pattern
Clearing a Pattern
Copying and Pasting Pattern
1. Press and toggle [FUNCTION] + [BANK GROUP]
2. Yellow ☼ LED 'Pattern Mode' indicates Direct Start mode is selected.
3. Select a new pattern. The pattern will start at the same synchronised step
to the previous playing pattern.
1. Press and toggle [FUNCTION] + [BANK GROUP]
2. Off ☼ 'Pattern Mode' LED indicates Sequential (default) mode.
3. Select a new pattern. The pattern will start at the end of the current
pattern.
1. Press [FUNCTION] + [KEYB F1] i.e. Pattern
2. Select the SAVE PATTERN option
3. Press [Yes/Save] – Pattern is saved
Or
1 Press [Yes/Save] + [KEYBD F1] i.e. Pattern for Quick Save
1. Press [FUNCTION] + [KEYB F1] i.e. Pattern
2. Select the RELOAD PATTERN option
3. Press [Yes/Save] – Pattern is saved
Or
1 Press [No/Reload] + [KEYBD F1] i.e. Pattern for Quick Reload
1. Press [FUNCTION] + [PLAY] i.e. Clear. Hold Until Timeout Window clears
2. Press [FUNCTION] + [PLAY] i.e. Clear again to UNDO Clear (if undo
possible is shown on the display)
1. Select Pattern to Copy
2. Press [FUNCTION] + [REC] i.e. Copy; to copy current pattern
3. Navigate using [BANK GROUP] & [BANK] + [TRIG] to select a
destination pattern slot
4. Press [FUNCTION] + [STOP] i.e. Paste, Hold until Timeout window clears
14