e.
Optical Drive
f.
Hard Drive
g.
Battery
6.
Follow the procedures in
Removing the Display Assembly
1.
Follow the procedures in
2.
Remove:
a.
Battery
b.
Hard Drive
c.
Optical Drive
d.
Bottom Cover
3.
Perform the following steps as shown in the illustration:
a. Lift the locking tab [1].
b. Disconnect the I/O cable [2].
c. Peel the adhesive tape [3].
d. Disconnect the eDP cable on the system board [4].
e. Peel the adhesive tape [5]
f. Disconnect the display assembly cable on the system board [6]
4.
Perform the following steps as shown in the illustration:
a. Remove the screws that secure the display assembly connector [1].
b. Lift the tab [2].
c. Disconnect the display assembly connector [3].
24
After Working Inside Your computer
Before Working Inside Your Computer