Dell Latitude 14 Rugged Owner's Manual page 41

Option
System Password
Internal HDD-1 Password
Strong Password
Password Configuration
Password Bypass
Password Change
Non-Admin Setup Changes
TPM Security
Computrace
Description
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Allows you to set, change or delete the system password.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Allows you to set or change the system's internal hard-disk drive.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
NOTE: If Strong Password is enabled, Admin and System passwords
must contain at least one uppercase character, one lowercase
character and be at least 8 characters long.
Allows you to determine the minimum and maximum length of
Administrator and System passwords.
Allows you to enable or disable the permission to bypass the System and
the Internal HDD password, when they are set. The options are:
• Disabled
• Reboot bypass
Default Setting: Disabled
Allows you to enable the disable permission to the System and Hard
Drive passwords when the admin password is set.
Default Setting: Allow Non-Admin Password Changes is selected
Allows you to determine whether changes to the setup options are
allowed when an Administrator Password is set. If disabled the setup
options are locked by the admin password.
Allows you to enable the Trusted Platform Module (TPM) during POST.
Default Setting: The option is disabled.
Allows you to activate or disable the optional Computrace software The
options are:
• Deactivate
• Disable
• Activate
41