Ipod Operations - Clarion VX402A Owner's Manual

iPod Operations

iPod/iPhone can be connected by using the
connector cable supplied with the iPod/iPhone,
but in this case, you can enjoy its audio sound
only. To enjoy video movies stored in the iPod/
iPhone with video displaying them on this unit,
it is required to use the special connector cable
(CCA-750) separately sold.
Note:
• This system will not operate or may operate
improperly with unsupported versions.
• For detailed information on the playable iPod/
iPhone models, see our home page:
www.clarion.com.
Notes on using Apple iPod/iPhone
• Do not connect an iPod/iPhone to this unit with
a headphone connected to the iPod/iPhone.
• After the iPod/iPhone has been connected to
this unit, the buttons of iPod are disabled for
operation in the Music mode.
• In the Video mode, do not operate the buttons
of iPod.
• When in the iPod mode, a special iPod/ iPhone
control screen is displayed different from the
main screens for other modes.
• When no data is present, the title display will
remain blank.
• The iPod/iPhone is used with the equalizer
function turned OFF.
• Set the language setting of iPod/iPhone to
English before connecting your iPod/iPhone.
Some characters of the other languages may
not be displayed correctly in this system.
• Precautions on battery consumption:
If the iPod/iPhone is connected to this unit when
the internal battery of iPod/iPhone has run down,
this function may not operate correctly. You must
connect the iPod/iPhone after charging the
battery if it has run down.
Selecting the iPod Audio mode
Connect your iPod/iPhone to the USB connector.
The system will automatically detect the
connected device and the iPod Audio button
will be enabled for operation on the Main Menu
screen.
When an iPod/iPhone is already connected
Touch the [iPod] key on the Main Menu screen.
The system changes to the iPod mode, and
starts playback from the previous position.
25
VX402A/VZ402A