Dvd Player Operations - Clarion VX402A Owner's Manual

DVD Player Operations

Change DVD/VCD System Settings
Selecting Setup Menu
1. Press the [Settings] button on the Main Menu
to access the Video setup menu.
2. Press [Video] button. The video menu is
displayed.
Setting up the Screen Size
1. Press the [Aspect Ratio] button to change the
screen size.
2. T ouch the desired aspect ratio: 4:3 or 16:9. The
factory default setting is "16:9".
Note: Not all disc support this function.
Setting up the password for parental level
control
The factory default pass code is "0000".
1. In Main Menu press [Settings] button. Press
[Rating] button on the display.
Touch the [Set Password] ---- and a numerical
key pad will appear.
Input a new password and come again. The
password is set.
Note: When a disc with view restrictions is
inserted, you will be prompted to input this
password. The disc will not be viewable until the
correct password is entered.
Set rating for parental level control
1. Select Rating screen while in Settings mode.
Press [Parental Control] button.
2. Enter right password.
3. P ress the desired rating for level control. Use
this table to set the parental level.
Kid Safe Kid Safe
G General Audiences
PG Parental Guidance Suggested
PG-13 Parents Strongly Cautioned
PG-R Parental Guidance Restricted
R Restricted
NC-17 No One 17 And Under Admitted
Adult Only Adult
• The contents that the parental level restricts
vary with the country code.
Watching to a disc
1. To load a disc:
Insert the disc into the center of the insertion slot
the label side facing up.
CAUTION
For your safety, the driver should not insert
or eject a disc, or operate the controls
while driving.
WARNING
Some videos may be recorded at higher
than desired volume levels. Increase the
volume gradually from the minimal
setting after the video has started.
Note:
• Never insert foreign objects into the disc
insertion slot.
• If the disc is not inserted easily, there may be
another disc in the mechanism or the unit may
require service.
• 8 cm (single play) discs cannot be used.
2. Disc starts playing automatically.
Ejecting a disc
1. To eject a disc press eject [
play mode then switches to the Tuner mode.
If the disc is left in the ejected position for 15
seconds, the disc is automatically reloaded. In
this case, the play mode will remain in the Tuner
mode.
Note: If y ou force a disc into before auto
reloading, it may damage a disc.
] button. The
17
VX402A/VZ402A