List Of Replaceable Parts; Introduction; How To Obtain Parts - Seintek S2401 Service Manual

5.

List of Replaceable Parts

5.1.

Introduction

This chapter contains an illustrated list of replaceable parts for the
Seintek Handy Scope meter. Parts are listed by assembly;
alphabetized by reference designator. Each assembly is accompanied
by an illustration showing the location of each part and its reference
designator. The parts lists give the following information:
1. Reference designator
2. An indication if the part is subject to damage by static discharge
3. Description
4. Seintek stock number
5. Total quantity
6. Any special notes (i.e., factory-selected part)
Caution
A * symbol indicates a device that may be damaged by static
discharge.
5.2.

How to Obtain Parts

Electrical components may be ordered directly from the manufacturer
by using the manufacturers part number, or from the Seintek and its
authorized representatives by using the part number under the
heading SEINTEK STOCK NO.
Parts price information is available from the Seintek or its
representatives.
Prices are also available in a Seintek Replacement Parts Catalog
which is available on request.
In the event that the part ordered has been replaced by a new or
improved part, the replacement will be accompanied by an
explanatory note and installation instructions, if necessary.
To ensure prompt delivery of the correct part, include the following
information when you place an order:
1. Instrument model and serial number
2. Part number and revision level of the pca containing the part.
3. Reference designator
4. Fluke stock number
5-1