Rear Panel - Korg SP 250 User Manual

Rear panel

2 2 2 2
1 1 1 1 Music stand holes: Insert the music stand into these two holes. Please note that,
the first times you use the music stand, you will need to apply some force to insert or
remove it. Later, the rubbery plastic material of which the holes are made will adapt
to the music stand, making the operation easier to carry on.
2 2 2 2 DAMPER connector: Connect the supplied pedal to this connector.
3 3 3 3 MIDI (IN, OUT) connectors: Connectors that are used to connect other MIDI
devices (sequencer, keyboards, etc.). OUT: Data output (to be connected to the
MIDI IN connector of another MIDI device). IN: Data input (to be connected to the
MIDI OUT connector of another MIDI device).
4 4 4 4 OUTPUT (L/MONO, R) connectors: Audio outputs. Connect these connectors to
an external amplifying system. (With a hi-fi system use the AUX or TAPE connec-
tors, not the PHONO connector). To amplify the SP-250 in mono, connect the sin-
gle L/MONO connector. Use the MASTER VOLUME slider to set the output
volume.
5 5 5 5 AC ADAPTER connector: Connect the supplied AC/DC adapter to this connector.
Panels
1 1 1 1
4 4 4 4
3 3 3 3
5 5 5 5
11