Jumper Settings; Table 3-3. Jumper Settings - OEM 6513WU Reference

Jumper Settings

NOTE: Jumpers not described in this chapter are reserved for factory
use only. Do not change the default settings.
Jumper
JP1
JP8
* To clear the RTC and CMOS RAM, set JP1 to 2-3 for one
second, and set it back to 1-2 again.
Definition
CMOS setting 1-2: Normal
2-3: Clear
CMOS
On-board audio 1-2: Enabled
select 2-3: Disabled

Table 3-3. Jumper Settings

Setting
17