Onboard FDC Controller
This item allows you to enable or disable the on-board floppy disk drive
controller. Select Disabled only if you want use a separate floppy disk drive
controller card.
Onboard Serial Port 1
This item sets the I/O address and interrupt request line (IRQ) for the on-board
serial port (COM1).
Onboard Parallel Port
This item sets the I/O address and interrupt request line (IRQ) for the on-board
parallel port (LPT).
Parallel Port Mode
This item sets the operating mode for the on-board parallel (LPT) port. Your
system supports EPP (Enhanced Parallel Port) and ECP (Extended Capabilities
Port) standards which turn the standard parallel port into a high speed bi-
directional peripheral port.
ECP Mode Use DMA
This item selects a DMA channel for the parallel port for use during ECP mode.
Game Port Address
This item sets the I/O address for the on-board game port.
Midi Port Address
This item sets the I/O address for the on-board midi port.
Midi Port IRQ
This item sets the interrupt request line (IRQ) for the on-board midi port.
28