Changing The Sounds Assigned To A Performance; Editing A Performance - Korg C-520 User Manual

Changing the sounds assigned to a performance

You can change the sound or sounds assigned to the current
performance, without the need of accessing the Edit mode.
Note: You cannot change performance sounds while in Perfor-
mance Edit mode.
Note: The EPx effects are not available when you are in Layer
mode.
1.
While you are in the Main page of the Performance mode,
press both SCROLL /
(or sounds) assigned to the performance are shown in the
display:
Main sound
Piano&Str.
Ac. Bass
Layer/Left sound

Editing a performance

You can edit any performance according to your taste. You can also save any combination of sounds over an existing performance.
See "Editing sounds and performances" on page 41.
Using performances > Changing the sounds assigned to a performance
buttons together. The sound
2.
If there are two sounds, use the SCROLL
to move the cursor to the sound you want to change.
3.
Use the +/YES and -/NO button to choose a different
sound.
4.
Press the EXIT button to exit from the above page. If you
chose a different performance, changes are lost.
5.
To save the changes use one of the save procedures ex-
plained in "Saving a performance" on page 42.
/ buttons
21