Table of Contents
Advertisement
Transport
Preparing and inserting
the transport bolts
Before transporting the washing machine (e.g. when
moving house).
1. Turn off the water tap.
2. Release the water pressure in the supply hose
(refer to Page 30).
3. Drain any residual washing solution (refer to
Page 29).
4. Disconnect the washing machine from the mains.
5. Detach the hoses.
6. Remove the covers.
7. Pull the bolt out of the sleeve until the end
of the bolt is flush with the end of the sleeve.
8. Insert and tighten transport bolts. The lugs on the
washer must be located in the groove in the rear
panel of the housing.
i Having transported the appliance and ensured
proper installation, connection and having re
moved the transport bolts, allow the DRAIN pro
gramme to run through before starting the first
wash programme.
47
Advertisement
Table of Contents
