Table of Contents
Advertisement
Levelling
procedure
All four appliance feet must be firmly on the ground.
The washing machine must not wobble.
1. Loosen the lock nut 1 using the wrench.
2. Adjust the height by rotating the foot 2.
3. Tighten the lock nut 1 against the housing.
Simultaneously hold the foot in place and do not
adjust the height.
All four feet must be firmly on the floor. The washing
machine must not wobble.
The lock nuts of all four appliance feet must be
screwed tightly against the housing!
Attention
Loud noise generation, vibrations and "wandering"
may be due to incorrect alignment!
45
Advertisement
Table of Contents
