Powering The Device On/Off; Powering Off To Standby Mode; Powering Off Using The Main Power Switch - Silvercrest PNA-M4310T User Manual And Service Information

English

Powering the Device On/Off

Powering Off to Standby Mode

1. Press and hold the On/Off button [page 69, item 1]
for approx. three seconds until the device powers
off. The status indicator [page 69, item 4] stops
lighting and the device switches to standby mode.
The device consumes electricity in the Standby
!
mode. Therefore it can discharge the battery when
in standby mode over a longer period of time. If
you will not be using the device for several days,
we recommend that you power it off by using the
main power switch.
80
Navigation Device PNA-M4310T

Powering Off Using the Main Power Switch

1. To power the device off completely, slide the main
power switch [page 69, item 10] into the Off
position. The status indicator [page 69, item 4] stops
lighting.
When powering the device off by using the main
i
power switch, all user-defined settings will be lost.
Only the chosen user interface language and the
time format (12 Hours or 24 Hours) will be kept.
To be able to power the device off by using the main
i
power switch you must toggle it to standby mode
first by pressing the On/Off button.