Upgrading The Firmware - Silvercrest PNA-M4310T User Manual And Service Information

Navigation Device PNA-M4310T

Upgrading the Firmware

When new firmware is released you can upload it to the
device. Copy the new firmware onto a memory card and
insert the card into the memory card slot [page 69, item 7].
Tap the button
-
,
to proceed with the upgrade or tap
,
to cancel the process.
When new firmware is released you'll find it on our
i
website http://www.silvercrest.cc.
While the upgrade is running never remove the
!
memory card and do not power the device of.
Otherwise the device may suffer severe damage.
If no compatible firmware I found on the memory
i
card the message Failed! appears on the display.
Make sure that the firmware is the only file on the
memory card and that it hasn't been saved into a
subfolder.
English
111