Powering The Device On/Off; Powering Off To Standby Mode; Powering Off Using The Main Power Switch - Silvercrest PNA-E3510 User Manual And Service Information

English

Powering the Device On/Off

Powering Off to Standby Mode

1. Press and hold the On/Off button [page 71, item 2]
for approx. four seconds until the device switches to
standby mode.
The device consumes electricity in the Standby
!
mode. Therefore it can discharge the battery when
in standby mode over a longer period of time. If
you will not be using the device for several days,
we recommend that you power it off by using the
main power switch.
80

Powering Off Using the Main Power Switch

1. To power the device off completely, slide the main
power switch [page 71, item 8] into the Off position.
To do so, use a thin object (e.g. a clip).
When powering the device off by using the main
i
power switch, all user-defined settings will be lost.
Only the chosen user interface language will be
kept.
To be able to power the device off by using the main
i
power switch you must toggle it to standby mode
first by pressing the On/Off button.
Navigation Device PNA-E3510