Firmware Upgrading - Silvercrest PNA-E3510 User Manual And Service Information

English

Firmware Upgrading

The menu item will be enabled only if there is a memory card
inserted.
When new firmware is released you can upload it to the
device. Copy the new firmware onto a memory card and
insert the card into the memory card slot [page 71, item 1].
1. Tap the button
,
to proceed with the upgrade or tap
,
to cancel the process.
112
Navigation Device PNA-E3510
When new firmware is released you'll find it on our
i
website http://www.silvercrest.cc.
While the upgrade is running never remove the
!
memory card and do not power the device off.
otherwise the device may suffer severe damage.
If no compatible firmware is found on the memory
i
card the message Failed! appears on the display.
Make sure that the firmware is the only file on the
memory card and that it has not been saved into a
subfolder.