Installation In Mac Os X - Korg M50 User Manual

Installation in Mac OS X

To install the M50 Editor and M50 Plug-In Editor into Mac OS X, use the following procedure.
You must install the KORG USB-MIDI Driver if you want to connect the M50 to your
computer via USB and use the M50 Editor or M50 Plug-In Editor. (For details on installing the
KORG USB-MIDI Driver, refer to the Install Guide.)
1
Insert the included CD-ROM into your CD-ROM drive.
2
Start up the installer by double-clicking "M50 Editor Installer.pkg" located in the "M50
Editor" folder of the CD-ROM.
3
Depending on the version of your Mac's operating system, a confirmation dialog box may
appear at this point. If
When the installer starts up, the following screen will appear. Click [Continue].
4
"Important information" will appear. Read the contents, and click [Continue].
5
The "License agreement" will appear. Carefully read the contents, and click [Continue].
A dialog box will ask whether you accept the terms of the license agreement. If you
accept, click [Agree].
required, please enter your password and click [OK].
5