Ableton - Live 7 - Korg M50 User Manual

Ableton - Live 7

1
Start up Live 7, and choose "View" →"Session View."
2
From the plug-in device browser, drag and drop "M50 Plug-In Editor" onto the session
view. This will create a MIDI track with "M50 Plug-In Editor" started up.
Verify that "M50 Plug-In Editor" is running in the MIDI track view.
3
Press the arm button so that the MIDI input from the external source will be sent to "M50
Plug-In Editor."
MIDI Track
4
To route the M50's audio signal to Live 7, create an audio track.
audio input/output section, select the audio interface input to which you've connected the
M50's audio signal.
Audio Track
5
Set the Monitor setting to "In" so that you can hear the audio signal of the M50.
Audio Track
12
In the input area of the