Save As Default - Korg M50 User Manual

Export
Data created in the M50 Editor can be saved as PCG data for the M50.

Save as Default

Writes (saves) the global mode Software Setup settings of the editor as the default settings that
will be used when you start up the editor.
Note: These utilities can be selected only in the editor's global mode Software Setup page.
Select Auto Load File
In the Software Setup tab, use "Load data file automatically" to select the desired file.
Note: Refer to "Load data file automatically".
All Sound Off
Depending on the host application, "hung" notes may occur while operating the host's functions. If
this symptom occurs, please execute the "All Sound Off" command.
26