Auto Mode; Stat; Version; And Up Or Down Button To Set The Desired Color - Beamz LED PAR 4X 8W Quad Linkable Manual Manual

Auto mode

This menu will let you select the desired auto mode.
Press MENU, press the UP or DOWN button until "Auto" is displayed, press ENTER.
There are 3 auto modes, press the UP or DOWN button to select the desired mode, press ENTER to
confirm.

Stat

Set the static color mode and strobe mode
Press MENU, press the UP or DOWN button until "Stat" is displayed, press ENTER.
You have now 5 options. To select the desired option press ENTER. With the UP and DOWN button
the desired value can be set. Press ENTER to confirm the desired value.

Version

Will display the software version of the unit.
Press MENU, press the UP or DOWN button until "ver" is displayed, press ENTER.
The software version of the unit will be displayed. Press MENU to leave this function
RGB
Built-in color mix
Press MENU, press the UP or DOWN button until "RGB" is displayed, press ENTER.
Press the UP or DOWN button to find the desired color to adjust. Press ENTER to confirm and UP or
DOWN button to set the desired color.

SET

This function will let you select some functions be enabled or disabled
ID
ID address setting
Press MENU, press the UP or DOWN button until "ID" is displayed, press ENTER.
Press the UP or DOWN buttons to select the ID address (ID00 – ID0066), press ENTER to confirm.
This setting is not used for most DMX controllers

Channel mode

Select the desired channel mode
Press MENU, press the UP or DOWN button until "Chnd" is displayed, press ENTER
"X Ch" will now be displayed, ("X" represents the displayed channel mode). Press the UP or DOWN
button to find the desired channel mode. Press ENTER to confirm.
- 7 -