Preparing The Projector - Sony VPL-FH300L Operating Instructions Manual

To continue projecting the pictures, check
the [Start Air Shot v2 and connect to
Projector] check box and click [OK].
Projector Station for Air Shot Version 2
starts up automatically.
When you are not going to project the
pictures, click [OK].
After executing [AutoConfig.exe], start up
the application with [PjstnASv2.exe].
When you change the computer, execute
[AutoConfig.exe].

Preparing the Projector

Setting the projector
1
Connect the network cable to the
NETWORK connector of the
projector.
2
Turn on the projector.
3
Press the AIR SHOT key on the
remote commander.
The home display of the network
presentation appears.
Serial number
Model name
Nick name (only
Operations
when specified)
guide
Icon
Icons representing network status:
being not connected
being connected
Mode
IP address
7
Preparation