Remote Function Overview - Sherwood R-125 Operating Instructions Manual

RECEIVER
11 POWER – for switching the complete system to standby
(by pressing for longer than approx. 1second).
12 SLEEP – for setting a time period after which the system
will automatically be switched to standby.
14 SYSTEM DISPLAY – for dimming displays of Sherwood
components connected by DIGI LINK
16 SOURCE SELECTORS
22 MUTE – for decreasing the volume.
SURROUND CONTROLS
23 SURROUND MODE
PRO LOGIC, 3 STEREO, SIMULATED,
THEATER, HALL,OFF – for selecting the different
surround modes.
24 CENTER MODE – for selecting the desired center mode
when in Dolby Pro Logic or Dolby 3 Stereo mode.
25 DELAY TIME – for adjusting the delay time of the rear
channel.
26 TEST TONE – for checking the output level of the front,
center and rear speakers.
27 CENTER LEVEL /
(only in normal or wide mode).
28 REAR LEVEL / – for adjusting the rear level
(in Dolby Pro Logic, Simulated, Theater, Hall mode)
33 MASTER VOLUME /
mainvolume.
TUNER
11 POWER – for switching the complete system to standby.
13 PRESET SCAN – for scanning the stations memorized in
memory.
15 0-9 digit buttons – for selecting stations in frequency
direct mode.
This unified remote control will only operate SHERWOOD
cassette decks or CD players displaying the Digi-Link
III
Digi-Link symbols, using the Digi-Link connections on the
rear of the components.
CASSETTE DECK
11 POWER – for switching the complete system to standby.
17 – for starting A or B side play.
18 – for stopping recording/play.
19 – for winding the tape.
10 – for interrupting recording/play.
11 DECK SELECTOR A, B – for selecting deck Aor B.
12 – for recording.
II III
or .
– for adjusting the center level
– for adjusting the
II
or

REMOTE FUNCTION OVERVIEW

COMPACT DISC PLAYER
11 POWER – for switching the complete system to standby.
15 0-9 digit buttons – for track selection, press required
button among 10 buttons on the remote control to select
disc No.(1~5) within 2 sec. after pressing the DISC
button.
13 DISC (CD changer only) – for disc selection.
14 – to begin play.
15 – to stop recording/play/clearing a program.
18 – for pausing recording/play.
19 – for searching forward and backward.
20 RAMDOM – to play tracks randomly.
21 INTRO – to preview each track only for 10 seconds.
EQUALIZER
29 PRESET – for selecting equalizer pattern.
30 USER – for adjusting equalizer pattern as desired.
31 FILE – for selecting desired equalizer pattern in the
preset or user mode.
32 TAPE M – for monitoring the sound of recording or
playback of cassette tape.
7