Table of Contents
Advertisement
a
FUNCTION OVERVIEW
AMPLIFIER
1. POWER - for control power of this receiver or system
(as described in amplifier chapter titled "POWER
STANDBY/ON")
2. SLEEP - for setting a time period after which the
system will automatically be switched to standby.
4, SYSTEM DISPLAY - for dimming displays of Sherwood
components connected by DIGI LINK Il or IL
6. SOURCE SELECTORS
22. MUTE - for decreasing the volume.
SURROUND CONTROLS
23. SURROUND MODE
OO PRO LOGIC,
DO 3 STEREO, SIMULATED,
THEATER, HALL,OFF -— for selecting the different
surround modes.
24. CENTER MODE - for selecting the desired center
mode when in Dolby Pro Logic or Dolby 3 Stereo mode.
25. DELAY TIME - for adjusting the delay time of the rear
channel.
26. TEST TONE - for checking the output levei of the front,
center and rear speakers.
|
27. CENTER LEVELY
/~
- for adjusting the center
level {only in normal mode or wide mode).
28. REAR LEVEL\
/ " - for adjusting the rear level
(in Dolby Pro Logic, Simulated, Theater, Hall mode)
33. MASTER VOLUMEY
/~_
- for adjusting the volume.
TUNER
3. PRESET SCAN - for scanning the stations memorized
in memory.
5. 0-9 digit buttons — for selecting the preset stations.
CASSETTE DECK
COMPACT DISC PLAYER
5. 0-9 digit buttons — for track selection, press required
button among 10 buttons on the remote control and for
disc selection, select disc No.{1~5) within 2 sec. after
pressing the DISC button.
ENGLIS
13. DISC
(CD changer only) — for disc selection.
14. » — to begin play.
15. = ~— to stop recording/play/clearing a program.
16. REPEAT 1/ALL - to play a track or al! tracks
repeatedly.
17. REPEAT A <> B - to play a specific passage
repeatedly.
18. 11 - for pausing recording/play.
19. <¢ >> -— for searching forward and backward.
20. RANDOM - to play tracks randomly.
21. INTRO —- to preview each track only for 10 seconds.
EQUALIZER
7. <> —for starting A or B side play.
8. m — for stopping recording/play.
9. <4 >b — for winding the tape.
10. 18 — for interrupting recording/play.
11. DECK SELECTOR A, B - for selecting deck Aor B.
12. @ — for recording.
In the DIG! LINK I remote control system, if pressimg
PLAY, etc on CD or Deck, CD or TAPE MONITOR is
selected automatically without selecting the source and
PLAY, etc. starts.
29. PRESET - for seiecting equalizer pattern.
30. USER - for adjusting equalizer pattern as desired.
31. FILE — for selecting desired equalizer pattern in the
preset or user mode.
32. TAPE M — for monitoring the sound of recording or
playback of cassette tape.
Advertisement
Table of Contents
