The Tandberg Dnam - TANDBERG 3000 MXP User Manual

5.6 The TANDBERG DNAM

The TANDBERG Digital Natural Audio Module*:

Audio In: S/PDIF or Analog

Differential In: Differential Mono input (Analog).

Pinout: 1 GND, 2 and 3 signal

Loop out: Will always give a mono analog output of the input. Even with S/PDIF in, this
output will give an analog mono output.

5 x 40W continuous average output power, to the load specified by DNAM speakers.

Fuse 2A 250V Slow, 5 x 20mm, Littelfuse type 215002.
Stereo out:
Peripheral Equipment
209