Table of Contents
Advertisement
2.8 Setting the Sender (From) Address
You can carry out the following steps to specify the mail address that appears
in the sender (From) line of the mail transmitted by Scan to E-mail, Internet
FAX transmission, e-mail notification function, and URL notification
function.
1.
Show the setup screen from the controller operation panel.
2.
Select [Network Setup] — [Service Setup] — [E-Mail Setup] and enter
the following settings.
[Fiery Email User Name]:
[Fiery Email Domain Name]:
Note
• The sender (From) address is Fiery Email User Name@Fiery Email
Domain Name.
2.8 Setting the Sender (From) Address
Specify the mail user name of the sender.
Specify the mail server domain name to which the
sender belongs.
2-21
Advertisement
Table of Contents
