Table of Contents
Advertisement
2.3.5 Checking the Settings on the
Destination Device
Press the [Check] button to view the settings on the destination device.
2.3.6 Registering the Scan Mode Default
Settings
You can arbitrary specify the default settings of the Scan Mode.
1.
Press the [Scan] key on the copier operation panel to enter the Scan
Mode.
2.
Select the setting to make the default value in the Scan Mode.
3.
Press the [Utility] key.
4.
Touch [Store].
5.
Touch [Reset Mode].
6.
Touch [Current Mode].
7.
Touch [Enter].
You can set the default settings of the Scan Mode to factory default by
touching [Factory Default].
2.3 Setup Items for Scanning
2-17
Advertisement
Table of Contents
