Hold Period Of The Image Data - Konica Minolta IC-401 User Manual

Pagescope web connection scanner mode

Hide thumbs Also See for IC-401:

Table of Contents

2.16 Hold Period of the Image Data

If the number of image data files held in the controller HDD keeps increasing,

there is a possibility that the disk becomes full. You can set the hold period of

the image data in the HDD by carrying out the following settings.

Note

Cases in which the image data is held in the HDD

• When using Scan to Mailbox

The image data is transferred to the HDD and held in the Mailbox

created in the HDD.

• When the size of the mail exceeds the upper limit specified by

[Maximum Scan File Size] on the mail function (see p. 2-23)

• When the upper mail limit specified by [Maximum Scan File Size] is

exceeded even after separating the data up to the number specified by

[Maximum Number of E-mails] when the data is separated because the

[Maximum Scan File Size] is exceeded in the mail transmission function

(see p. 2-23, p. 2-24)

Show the setup screen from the controller operation panel.

Select [Server Setup] and enter the following settings.

[Clear Each Scan Job]:

Settings

2-52

Select the hold period. The image data is automatically

cleared when the hold period elapses.

After 1 day, Now, Manually, After 1week

Table of Contents