Quick Operation Of The Android System - Embest SBC8600B Quick Start Manual

 Type [9]->[4]->[A], [9]->[3]->[B] and [9]->[2]->[C] to write
XLDR, EBOOT and NK images;
 Type [0] to return to the main menu, and then type [2] and [3] to
select boot-up from NAND Flash; Type [A] to select LCD/DVI display
mode; Type [7] and [y] to save the boot-up settings;
Remove the TF card and reboot the system. The system will boot from NAND
Flash.

4.3 Quick Operation of the Android System

The SBC8600B provides an Android system demonstration, please follow the
steps listed below:
1. Copy all files under the directory \linux\demo\Android\image of
the DVD-ROM to a TF card;
2. Insert the TF card on the board and short jumper JP5, and then
power on the board. The debugging tool will show the following
information:
CCCCCCCC
U-Boot SPL 2011.09-svn55 (Dec 04 2012 - 09:36:25)
Texas Instruments Revision detection unimplemented
Booting from MMC...
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2011.09-svn55 (Nov 22 2012 - 11:35:28)
I2C: ready
DRAM: 512 MiB
WARNING: Caches not enabled
Did not find a recognized configuration, assuming General
purpose EVM in Profile 0 with Daughter board
NAND: HW ECC Hamming Code selected
512 MiB
MMC: OMAP SD/MMC: 0
*** Warning - bad CRC, using default environment
Page | 23