Boot-Up From Nand Flash - Embest SBC8600B Quick Start Manual

| |
| | |-----.-----.-----.| |
| |
| | | | |
'---'---'--'--'--. |-----''----''--' '-----'-'-'-'
The Angstrom Distribution SBC8600 ttyO0
Angstrom 2008.1-test-20090127 SBC8600 ttyO0
SBC8600 login: (Type "root")
The above information indicates a successful boot-up of Linux from the TF
card.

4.1.2 Boot-up From NAND Flash

Updating of the NAND boot-up image is accomplished by u-boot. Regardless
of whether NAND Flash contains data, u-boot can be used to update any
NAND Flash images.
Preparation
1. Format the TF card to a FAT or FAT32 file system by using the HP
USB Disk Storage Format Tool 2.0.6
2. Copy the files MLO, u-boot.img, uImage and ubi.img under
the directory linux\image from DVD-ROM into a TF card.
Update
3. Insert the TF card which contains the system images into the
development board, and then connect the power supply. Press
any key on the keyboard to enter u-boot when the message "Hit
any key to stop autoboot" appears:
.-.
.----..-----.-----.
| __ | ---'| '--.| .-'|
|--- || --'| | | ' | | | |
-' |
'---'
| |
Page | 14