Booting-Up From Nand Flash - Embest SBC8600B Quick Start Manual

+OEMIsFlashAddr(0x80002000) g_eboot.type 1
...........................................................
...........................................................
...........................................................
...........................................................
...........................................................
...............................................rom_offset=0
x0.
..ImageStart = 0x80002000, ImageLength = 0x3c9e9bc, LaunchAddr
= 0x8000b6a0
Completed file(s):
-----------------------------------------------------------
--------------------
+OEMIsFlashAddr(0x80002000) g_eboot.type 1
[0]: Address=0x80002000 Length=0x3c9e9bc Name="" Target=RAM
ROMHDR at Address 80002044h
Launch Windows CE image by jumping to 0x8000b6a0...
Windows CE Kernel for ARM (Thumb Enabled)
CPU CP15 Control Register = 0xc5387f
CPU CP15 Auxiliary Control Register = 0x42
I2C EEPROM returned wrong magic value 0xffffffff
+OALTimerInit(1, 24000, 200)
--- High Performance Frequecy is 24 MHz---

4.2.2 Booting-up From NAND Flash

1. Formatting TF card
Please refer to p17 for instructions
2. Copy runtime image
Copy MLO, EBOOTND.nb0,
EBOOTSD.nb0 image files under CD\WINCE700\image to the TF card.
3. Update of NAND Flash image files
Insert TF card, reboot the system from TF card and press Space in a few
seconds to enter to the EBOOT menu, and then follow the steps listed below:
 Type [8] to enter the Flash menu;
NK.bin, XLDRNAND.nb0 and
Page | 22