iHealth BP7 Quick Start Manual

Wireless blood pressure wrist monitor

Hide thumbs Also See for BP7:

Table of Contents

Download this manual See also: Owner's Manual

Wireless Blood Pressure Wrist Monitor (BP7)

QUICK START GUIDE

Thanks for your purchase.

This Quick Start Guide tells you how to set up your iOS

device, connect to Bluetooth, and measure your blood pressure. Please follow the instruction

below to start your measurement process.

First Time Set Up Instructions

Prior to first use, download and install "iHealth MyVitals" from the App Store.

Follow the on-screen instructions to register and set up your personal account

Table of Contents

Do you have a question about the BP7 and is the answer not in the manual?

Page 1 First Time Set Up Instructions Download the Free iHealth MyVitals App Prior to first use, download and install "iHealth MyVitals" from the App Store. Account Set Up and Registration Follow the on-screen instructions to register and set up your personal account...
Page 2 Turn Bluetooth "On" under the "Settings" Menu on the iOS device. • Wait until the model name printed on the monitor, (i.e. "BP7 xxxxxx") and "Not Paired" appear in the Bluetooth menu, and select the model name "BP7 xxxxxx" to pair and connect.
Page 3: Measurement Procedures
Do not move your wrist, body, or the monitor. Place your hand palm-side up in front of you and wrap the cuff around a bare wrist 1-2cm above the wrist joint. If the monitor is correctly placed, iHealth logo will be facing upright.
Page 4 Turn off the Bluetooth on the last used iOS device if the Auto Connect option is enabled in your App, then follow the set up instructions in the Quick Start Guide. Measuring without an iOS Device Enable the Offline Measurement function on the App. (Device Setting->Offline Measurement->On) Apply the cuff, follow the measurement Procedures, and then press the "START/STOP"...