Table of Contents
Advertisement
VOLUME
Up
Button
VOLUME
Down
Button
Push-To-Talk
(PTT)
Button
POWER
ON-OFF
Key
8
- Is used to ramp through and select groups
and channels. This function is only active while
calls are not in progress. During a call
to send the DTMF tone for #. In the Telephone
Interconnect mode,
is used to end the call.
DISPLAY INDICATORS
A Liquid Crystal Display (LCD) displays telephone
Display
numbers and messages associated with call process-
ing and feature processing. The display has eight
14-segment alphanumeric characters and other
dedicated status indicators.
ALPHANUMERIC STATUS INDICATORS
Keypad
BUSY - Indicates an attempt to place a call has been
made but the selected GE-MARC system does not
have any available channels. If the "Call Retry"
option has been enabled during radio initialization
by the system operator, the radio will retry at 5
second intervals, up to 15 times unless the END
key is pressed or a channel is acquired, or an out-
of-range condition occurs.
Internal
RETRYING - Indicates the radio is attempting to
Speaker
establish a channel.
WAIT - Indicates the radio is acquiring a channel
after call origination has begun.
STATUS INDICATORS
NO SVC - Indicates a transmission request has
been made and the call can not be completed. This
may be because the unit is out of the service area of
the selected GE-MARC system.
ROAM - Indicates the mobile is on channel in the
conversation mode.
is used
Advertisement
Table of Contents
